leave it on, or take it off

I just added some aluminum mesh to the fairing, not sure how it looks. What do you guys/girls think? Should I leave it on, take it off, paint it black....let me know....thanks.

leave it, makes it look alot better

Like it man. Looks sweet. :thumbup:

Leave it alone. Looks good as is against the white. :thumbup: BTW, how did you mount it?

Duct tape duh :laughingr

I'm ashamed to admit it, but I did duck it. I was gonna jb weld it but wasnt ready to make it permanent

lol how did i guess . Yea always good to tape it , so if u dont like it u can remove it :thumbup:

honestly i dont like that at all.............looks like a crappy bodykit for a civic now :lol:

yea but thats fancy lol .......... Most civics get some old rusty chicken fense and put it in there bumper

its really nasty bro, despite all these people liking it.....i'm from so. cali, home of gorgeous cars/bikes/woman, and NOBODY has mesh on their bike :headshake how does that look good to you guys? :headscrat

Looks good to me. Idk what to tell you. Maybe you have bad taste. Maybe your WRONG. Maybe your are to tired to see the beauty in his bike. Maybe your WRONG. Maybe ........... lol jp idk ur opinion

with the white fairings, i'm not feelin that. it doesn't look like crap or anything just not my taste.

with the white fairings, i'm not feelin that. it doesn't look like crap or anything just not my taste. Thank you

i'm not sure if i like it either. i'm going to paint it black and have a look...don't worry i wont bother everyone by posting pic. j/k

yea black wouldnt look bad either. Probly look better up 2 u, ur bike

thanks man

i was also thinking about chrome plating or polishing the frame, swing arm and rims, then black wouldn't work.

u could even try white, if u are going to id do white before black, black would cover the white up alot easier

looks alright to me but i really couldnt see myself doin it even tho i could get the material free at work....its just to ricer but maybe itll look better black lol found this soon after...wanted to do this for halloween http://www.afrotechmods.com/submitted/honda/honda2.htm

haha that fukin last pic was funny as hell. Nice photo chopping ........

Looks good I would leave it on

Looks good. As for "nobody around here does it" F@#k everyone else. Never do something just because "everyone else does it" It's your bike.....make it your own. Do you think there would be so many bad ass bikes out there if everyone made their shit look the same? Make it original..... that's half the fun!!

thanks gixxerk1

i like it. i did it on my busa only i used black and smaller mesh so that it alomost looked filled in. i think that the black to match the frame would offset the white real well. post it up and lets see. but in the end it really is your bike so do what you like and dont worry about what we think.

looks really sweet where did you get the carbon fiber pegs

I like the way it looks, but its your bike man!

looks really sweet where did you get the carbon fiber pegs the frame sliders are lockhart phillips usa, but the end caps originaly came silver with black bolts, so I bought silver bolts and black caps to match the bar end sliders. I got it from Iron Pony in Columbus, OH-but most shops can get those too

:thumbup: I think that it actually looks sharp, but what it does I still don't know.? :hmmm:

leave it on :thumbup:

I think it looks really sharp :clap: and original! I would say leave it on!!! :D

it looks great. leave it the way it is :arsenal

Thanks. Its starting to grow on me now, I think that Im gonna leave it.

good that is great that ya leave it on. Its looks grat that way for sure

Hey Man I like it.... I think you should leave it. Infact do you mind if I ask where you got the stuff, how much and do you mind if I do the same? :arsenal ride like you got a pair.... (you too ladies)

Hey Man I like it.... I think you should leave it. Infact do you mind if I ask where you got the stuff, how much and do you mind if I do the same? :arsenal ride like you got a pair.... (you too ladies) thanks. Nah, thats cool to do the same...its not like I made it up- alot of tuner car people do that to their intakes too. Actually its for cars- I got it at Auto Zone and it cost around $50- its called aluminum mesh and made by APC

i think it looks good something different never hurts why be like everyone else

Where Can I Get Some For My Gsxr 1000?

Where Can I Get Some For My Gsxr 1000? I got it at autozone- its called aluminum mesh made by APC or something. Its around $50 for a whole sheet

Looks good man. How do you remove your fairings withe the mesh in place and frame sliders? Trying to visualize how difficult it would be....

it is new to me no one in my area has done that i showed the pic of your bike to a few of my friends and it blew their minds no one ever thought of that around here

it is new to me no one in my area has done that i showed the pic of your bike to a few of my friends and it blew their minds no one ever thought of that around here Thanks man! :thumbup:

Looks good man. How do you remove your fairings withe the mesh in place and frame sliders? Trying to visualize how difficult it would be.... I just need to unbolt the sliders first then take of the plastics- the mesh is attached the the fairings.