Gsxr 1078CCR

Here´s my baby... i spent 22.000 usd on mods. Least of it where external. Here´s list of what i remember. Head job, Web highlift camshafts Degreed timing, 1mm oversize valves, stiff springs, titanium retainers, 3mm big bore = 1078cc, Crawer rods, oversize throttlebody ECU changed to 13500rpm, Powercommander, quick shift, STM slipper clutch, Yoshimura superbike transmission, Graves motorsport titanium exhaust sys, CRG brake/clutch levers, Vortex rearset, K&N, Ohlins rear shock, K-Tech 25mm cartridge and springs in front, steelbraded Goodridge breakhoses, Corona Extra body. Dynoed: 197.2 rwhp 92 lbs/ft Mods done at: Cycle concepts racing Tel: 001-803-285-8093. http://i27.tinypic.com/k1uhec.jpg http://i28.tinypic.com/dyn9y8.jpg http://i28.tinypic.com/2je4s21.jpg http://i30.tinypic.com/2aipoy0.jpg http://i27.tinypic.com/2hxlld2.jpg

:needpics:

Hmm... can you not see the pix?? if not, i will fix that!! i can see the pix, but perhaps the webside i refer to my pictures doesn´t allow them to be linked??? let me know, and i´ll fix this!!!!

Nope can't see anything, except your list of mods!

This should work?? If not.. you can see the pictures here!! http://ruddar.spjallbord.net/default.aspx?g=posts&t=1065

Ready for the track!!!

Looks sick bro!

that is a sick bike, i like it alot. 22000 is alot to put in a bike. i will put maybe 5000 not 22000

love it. i wanna bore my bike.

love it, never seen that scheme with the 1000's

nicely done..is that 03-04

Thanks!!! This is a K3. When i started this project, i was going to spend 5000 on it.. got permission from wife to do so.. and when i got to 5000, i wasn´t half way there.. it was obvious that i would spend alot more. For example: Yoshimura type A close ratio transmission costs $6772 (or 3386 gbp) you can view it here http://www.crescent-suzuki.com/pages/shop/product_detail.aspx?pid=381 This monster wheelies in all 6 gears! Had two dyno run done on it.. 192rwhp.. and 197.2 rwhp.

Thanks!!! This is a K3. When i started this project, i was going to spend 5000 on it.. got permission from wife to do so.. and when i got to 5000, i wasn´t half way there.. it was obvious that i would spend alot more. For example: Yoshimura type A close ratio transmission costs $6772 (or 3386 gbp) you can view it here http://www.crescent-suzuki.com/pages/shop/product_detail.aspx?pid=381 This monster wheelies in all 6 gears! Had two dyno run done on it.. 192rwhp.. and 197.2 rwhp. HOLLY TOLEDO BATMAN!!!!!!!!! Like I said nicely done. and thanks for that link..nice site, got mad shit on there oh yea did I tell you "nicely done":bowdown:

nice job i bet that thing is a beast. can i send u my 04 1000 and u do that for me. your treeeeet plz.. nice ride man:thumbup:

nice job i bet that thing is a beast. can i send u my 04 1000 and u do that for me. your treeeeet plz.. nice ride man:thumbup: hehe.. i´m still on parole with the wife.. you wanna get me divorced?? :shifty But i urge you to talk to Dwaine and CO at cycle concepts racing... They are most exellent to deal with!!!

no contest, this is bike of the month!

:cheers: Thanks...

Good builder you mentioned Good ole Dwayne He puts out great work and your bike mods and power you ave shows why. Nice bike as well and get it to the track ( if its circle or straight have some safe fun)

Cool. But with all the money you've spent, I think you can spare $90 on decent frame sliders to save your investment.

Cool. But with all the money you've spent, I think you can spare $90 on decent frame sliders to save your investment. Yes most definetly!!!! I already bought sliders, they are not on these pictures.. but bike will be fitted with sliders before upcoming season.. specially cause i plan to use it on track this summer. Last summer was more just getting use to more power i´ve ever handled. I took it for few circles on road race practice last summer, and HOLY CRAP!!! You got to think FAST!!!!!! cause before you know, it´s up on the back wheel. if you come out of corner in 2nd and throttle up, the front wheel comes up, you can acctually hold the front wheel steady 10 inches from the ground and change gears 3rd - 4th without the wheel to drop... that is NEW to me.. normally front goes down between gears if you are that short in the air. But yes!! i will protect my investment with sliders!!!!! thanks for the consern.

A little more about it. Here you can find the internals in the forks. I bought springs according my weight. K-Tech 25mm cartridge (http://www.k-tech.uk.com/rr_forkinternals.php) Ohlins rear shock (http://www.indysuperbike.com/customer/product.php?productid=114383&cat=&page=16)

Here´s one for you guys n gals.. This is one brilliant link... http://www.gearingcommander.com/ You can see changes in speed if you want to change sprockets. This guy actually made special setup in there for me... If you choose "suzuki - Gsxr - 1000 yoshimura-A" you´ll get my bike!! And of course he´s got most of the regular as well!!! Check him out!!!

really nice bike!

my vote as the bike of the month... had this beast pass me on the dragstrip on my Busa..

Thanks Gulag.. Perhaps we´ll meet on the strip again this spring?? till then .. take care! :thumbup:

you´ve got my vote:clap:

Those sure our pretty pistons:bowdown:

It´s almost half way trough feb?? when is the vote for the bike of the month???

Thought i had lost this dyno sheed... but fortunaly i had post it in bike pix when i got it.. 197.2 RWHP 92lbs/ft http://w2.bikepics.com/pics/2007/02/18/bikepics-805358-800.jpg AND... the clutch........ http://w2.bikepics.com/pics/2007/02/18/bikepics-805364-800.jpg

got_ink no contest, this is bike of the month! +1

I'll wait to post my bike in May when the competition isn't so stiff. That way I'll get a few pity votes lol

This should work?? If not.. you can see the pictures here!! http://ruddar.spjallbord.net/default.aspx?g=posts&t=1065 I wish I hadn't dropped out of spanish class:lol:, I cant understand a word of what they are posting.:damn: That is one sick bike, and mad props to your wife for being so understanding. :thumbup: If you ever want to get rid of her, give me a call. You figure out which one I'm talking about:D. Where do we vote? This bike most definately has my vote!!!

I wish I hadn't dropped out of spanish class:lol:, I cant understand a word of what they are posting.:damn: That is one sick bike, and mad props to your wife for being so understanding. :thumbup: If you ever want to get rid of her, give me a call. You figure out which one I'm talking about:D. Where do we vote? This bike most definately has my vote!!! hehe... it wouldn´t matter about your spanish... this is icelandic.. I couldn´t think of getting rid of her... i love her to much,, you figure out wich one I am talkin about.. but i sure give you a call about the other one when the day comes. ;)

[quote=Gulag;610017]my vote as the bike of the month... [quote] +1:thumbup: So sick

Maybie it´s going to be in top five "when" the competition for the bike of the month goes on again. :hmmm: Thanks for NICE comments guys!!! :thumbup:

took the bike out for the season today.. new plugs, oil and filter.. Ahh, also had to adjust the valve clearance.. since the valves where new... and had to set.. I´m going to the dyno with it tomorrow again, see what we´ll get.. valves had started setting when the bike was dynoed last time.. hoping to get 1-3rwhp more out of it.. ;)