I've been racing my bike alot lately and the clutch is starting to get where you can't slip it. The lever is ajusted properly but when the clutch starts to grab it grabs all at once. Would like to no how to fix this and if this is a common problem.2006 gsxr 1000
Sounds like you've burnt the steels. Its really not a big deal, at least to me, I burn a set up every 2 months or so, its part of drag racing. A whole new clutch is around 200-225, get an oem not a barnett or vesrah, you cant beat oem clutches for drag racing. If its not slipping you can get away with just replacing the steels, cost you about 7 bucks a piece, youve got 9 so roughly 60 bucks you'll be back in business.
No clutch steels are prolly not covered, esspecially if they know you've been drag racing it. I wouldnt recomend bead blasting or sanding them either, If you drag race alot. Ive seen sanding them make them grabby to, you need a little bit of slip to launch. You cant beat new steels. You might want to check at bracksracing.com for his clutch mod kit for the 05-06 1000, im not sure what it does because I have an 02 but alot of guys use them and seem to really like them.