'07 GSXR 750 - Help Troubleshooting
Okay, just installed new motor, wiring harness, PCIII, ingition module, Yoshi full system.
Motor runs fine. Put in gear and takes off fine. When I get to 25-30 mph in first at about 4-4.5K rpm the motor cuts out until speed is lowered and rpm's are lowered. If I quick shift, I can get it to go faster, but again, at about the same rpm it will cut out again.
Obviously some switch or something is not doing it's normal thing so the motor is being told to cut out a certain RPM. Also, the red light on the cluster stays on. The oil icon goes out, but the read light stays on. Again, I'm sure that probably some fault code, but not sure what it is.
PNWRiders Racing Team
Adrenaline Freaks Track Days
Power Stands Racing
More Power Racing
Race Tech Suspension