Join Date: Oct 2008
Location: Hometown San Antonio, TX
PCV install on a K9 600 (confusion eliminated)
Dyno Jet really needs to update there install diagram. I tried to make it a liitle easier. I hope someone benefits from this. I spent three hours putting that thing on. Good note was I didnt screw anything up and everything works. Good Luck!
To sum it up get a pair of angled neetle nose pliers you will greatly benefit and save alot of time taking off the bottom injectors.
FIG D. steps 8 thru 10 are OBSOLETE...
There is no grey wire and no need to attach wire tap to pink wire from TPS SKIP THIS STEP
09 GSXR 600
PCV,K&N Filters, Megaphone Exhaust, -1+2, Frame Sliders, Lowered (R) 2 1/4 - 1/2 (F)