Yeah, I'm with Jet on this one. If it ran good in Cali, you should get away with a good cleaning, and seals. Be sure your floats are set right, and rock it. I have a '95 750 W. GREAT bikes...
Well, the problem is I don't know how to do any of that stuff!!!!
When I moved from Cali to WA State, the bike sat for about a year or so. The rear sprocket was flattened out, because the place that installed my tires I guess had it adjusted to far or something, I don't know.
So I did the 520 Conversion on it, +1/-2 (or maybe it was the other way around - gained more bottom end, and lost top end) on the front sprocket, and rode the bike. Never had the carbs cleaned, jetted, sync'd, anything.
And now moving here, I would much rather get the carbs and stuff done *before* running it again.
The bike has currently been sitting for about 4 years. So obviously, I will need to do an oil change, along with cleaning out the tank.
That's why I was asking if anyone knew of a shop around, or a club, or something, where they don't mind teaching how to do it, etc.
Thank you folks for the assistance!