Suzuki GSXR Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
306 Posts
Discussion Starter · #1 ·
ok i havent tried yet but am thinking about it before i get to doing it. I think i know how to do it but ill ask anyways. Ok i need ot adjust the left side rearset (stock) k8 1000 all the way up and forward, so to do this i just loosen the 4 hex bolts and take off the shift linkage before i can move it right? then just readjust the linkage to the new spot. is that right or wrong, lemme know before i get doin it
 

·
Registered
Joined
·
2,060 Posts
Not sure how different the 1k is from the 750 but I had to take those bolts all the way out if I remember correctly, and I didnt have to remove the shifter linkage either. But its been 2 years since I did it but anyway, you should have no probs fingering it out
 

·
Registered
Joined
·
6 Posts
Just did my 08 1k gixxer today. Simply remove the (2) bolts on eack lever plate and set the lever in the desired position. Reinstall the bolts with a little blue locktite. There are 3 positions to choose from. Mine came in the top, forward position. I move mine straight down. I did not have to adjust the shifter rod length at all.
 
1 - 3 of 3 Posts
Top