Suzuki GSXR Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hey guys, whats up. I'm actually not a gsxr owner, i ride but cant afford everything i want now so i have something a bit cheaper (91 vx800). anyways, i need to know what years/bikes used the same throttle bodies as the 03 gsxr1000. I heard they were the same for 01-03 but i am not sure, also wondered if the same tb's were used on a busa, gsxr750, etc. etc. The reason i ask is that i plan to use them for a custom ITB setup on a nissan 240sx and a guy from our forum had great success using the 03 gsxr1000 tb's....the spacing is perfect for our manifolds and the 42mm inlet size allows about the best possible flow characteristics for the engine. I need the tb's, but i figured it might be easier to find a set if i knew what all used this setup. I have a link to the thread showing the setup for reference. Thanks a lot.

http://www.zilvia.net/f/showthread.php?t=68181&page=1&pp=30

-Brian
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top