Suzuki GSXR Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter · #1 ·
I bought a used set of tires. The guy also had a rear rotor and braided front brake lines from a GSXR. He said he thought they were from the same year as mine. So I bought them too. When I went to put the rotor on, it is bigger than mine. I didn't measure mine, but as near as I can measure, the one I bought is 236 or 237mm. I'm going to sell it, but I don't know what year bike it is from. The lines will work, but they seem to be slightly longer than stock. Anyone have any ideas?
 

·
Registered
Joined
·
44 Posts
Discussion Starter · #9 ·
I looked over again. My factory one only has the minimum thickness stamped on it. The one in question has the same minimum thickness, but it also has a "4Y" stamped on the carrier area.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top