Suzuki GSXR Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi

I have a Gsxr 750 k8 and recently have got the c28 code.

I start the bike and the plates go from closed>open>closed and the bike starts fine.
After a short time of riding the error appears And I’m restricted to 8k rpm.
Usually I can try stopping the bike and starting again and the error goes and the bike is fine for the majority of my ride unless I let it cool off.
Is there a solution to this issue that’s ruining my experience with my bike

any help would be greatly received.

thanks Craig
 

·
Premium Member
2005 GSX-R600 Anniversary Edition
Joined
·
3,293 Posts
Test the sensor. The actuator and it's connections are good if it can open and close like that. Sounds like it's hunting for it's position too, so definitely check the sensor.
 
1 - 2 of 2 Posts
Top