Suzuki GSXR Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #7 ·
Yes I made the plate holder. 1/4" aluminum plate, CNC machined out the arm and the back is .160 thick aluminum tapped 1/4-20 4 plcs. I have drawings of this, but my cost was $0.0. It's pretty simple if you have or know somebody with a shop.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top