Suzuki GSXR Forum banner
1 - 20 of 49 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Mod list so far:
- Marchesini’s
- Alth front discs / ferodo
- Galfer rear disc / brembo
- Driven sprocket setup
- HEL ss lines
- Gilles chain adjusters black (must be installed yet)
- Yoshimura TRC
- ASV levers
- HID 8000K
- Zero Gravity dark screen
- Valtermoto bobbins
- Frame plugs

On the way:
- Gilles rearset black
- Wilbers front suspension springs

Enjoy! (p.s. yeah, chicken stripes, but the tires are new :hmmm:)

















 

·
Registered
Joined
·
322 Posts
NICE BIKE..........:thumbup:


I wouldnt use the gilles chain adjusters as they are poor quality and quite a few have cracked causing the wheel to twist or the chain constantly loose........
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #9 ·
NICE BIKE..........:thumbup:


I wouldnt use the gilles chain adjusters as they are poor quality and quite a few have cracked causing the wheel to twist or the chain constantly loose........
I found some topics about that. They crack because those things are under much pressure when you shift hard. The issue was with the stock adjuster bolt/locknut needing to be re-installed to keep Gilles adjuster from collapsing under load

The normal Gilles bolt that goes into the swingarm can't handle the job very well. Many people switched to the oem bolt, it's longer and stronger and is placed against the adjuster itself so the tension will be much lower on the adjuster.

See this topic:
http://www.gixxer.com/forums/showthread.php?t=179467&highlight=installing+gilles+chain+adjuster
 

·
Registered
Joined
·
1,832 Posts
I found some topics about that. They crack because those things are under much pressure when you shift hard. The issue was with the stock adjuster bolt/locknut needing to be re-installed to keep Gilles adjuster from collapsing under load

The normal Gilles bolt that goes into the swingarm can't handle the job very well. Many people switched to the oem bolt, it's longer and stronger and is placed against the adjuster itself so the tension will be much lower on the adjuster.

See this topic:
http://www.gixxer.com/forums/showthread.php?t=179467&highlight=installing+gilles+chain+adjuster
Or you could always just trade me bikes and call it a day! :laughingr
 

·
Registered
Joined
·
914 Posts
thats a badass looking bike you have there good job on it!!!:thumbup:
 

·
Registered
Joined
·
971 Posts
your bike looks so blasted wicked:arsenal...

ever thought about getting red rim tape:hmmm:
Are you nuts???? rim tape on marchesini's??? RETARD :headshake
 

·
Registered
Joined
·
154 Posts
Mod list so far:
- Marchesini’s
- Alth front discs / ferodo
- Galfer rear disc / brembo
- Driven sprocket setup
- HEL ss lines
- Gilles chain adjusters black (must be installed yet)
- Yoshimura TRC
- ASV levers
- HID 8000K
- Zero Gravity dark screen
- Valtermoto bobbins
- Frame plugs

On the way:
- Gilles rearset black
- Wilbers front suspension springs

Enjoy! (p.s. yeah, chicken stripes, but the tires are new :hmmm:)

















Son that shit is hot! I'm thinking about doing the same to my blue and white.
 

·
Registered
Joined
·
914 Posts
the really like those wheels!!! where can i find some that doesn't cost 1700 bucks for the rims.
 
1 - 20 of 49 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top