Suzuki GSXR Forum banner
1 - 19 of 19 Posts

·
Registered
Joined
·
322 Posts
Discussion Starter · #1 · (Edited)
Well i put the bike back together today so all thats left is the exhaust to arrive and the gilles parts to come back from the powder coaters and i bought the new d.i.d o ring chain today and the silver/black supersprox sprockets should be here next tuesday...Im thinking about getting the promach/cresent suzuki chain adjusters/lifters anodized black but i will fit them tomorrow and make my mind up on them tomorrow,the GB racing engine covers are exellent and a peice of cake to fit and look really subtle and the carbon fibre parts dont stick out like a sore thumb as some peeps implied they would on another forum and are quite subtle...The GILLES VCR rear sets look the dogs danglies in black aswell and the front and rear galfer discs look sik !!!.The R1 calipers look really good and cant wait to try them out up over brecon beacons here in south wales u.k...The R+G rad gaurds and oil cooler gaurds were a bit fiddly to fit but are solid and should stop the oil cooler and radiator getting holes in them and they are very good quality and should last no probs,the rear smoked brake light was a pain in the ass as most of the plastics on the rear end had to come off to fit it but it looks good and you would'nt notice its not stock apart from it being a smoked finish,the frame plugs tidy the holes up in the frame quite nicely aswell and dont look out of place against the carbon fibre frame protectors ,im well happy how it's turned out but i've just bought some gb moto indicator pods in carbon fibre but that will be it then no more carbon fibre :lol: and the smoked indicators are a nice addition on the front of the bike but im still waiting for the rear indicators to arrive from the states....So what you think not too much in your face with trick bits or nice and subtle and would'nt notice till it was parked up at a meet...??????




smoked turn signal all round and smoked rear tail light


carbon fibre frame protectors,GB racing engine covers,GILLES VCR racing rear set,frame plugs,R+G aero frame crash protectors


suzuki carbon look gel seat


exhaust will look like this one but have a ceramic coating in black and the end peice will be carbon fibre...:cool:



new rear super sprox sprocket here next tuesday



promach/cresent suzuki racing chain adjusters/lifters these are going to the anodizers tuesday to be anodized black



2007 yamaha R1 4 piston silver pots on custom billett 2.5mm spacers with 310mm galfer racing discs front and rear on black stainless steel goodridge racing brake line fron and rear

 

·
Registered
Joined
·
78 Posts
Well i put the bike back together today so all thats left is the exhaust to arrive and the gilles parts to come back from the powder coaters and i bought the new d.i.d o ring chain today and the silver/black supersprox sprockets should be here next tuesday...Im thinking about getting the promach/cresent suzuki chain adjusters/lifters anodized black but i will fit them tomorrow and make my mind up on them tomorrow,the GB racing engine covers are exellent and a peice of cake to fit and look really subtle and the carbon fibre parts dont stick out like a sore thumb as some peeps implied they would on another forum and are quite subtle...The GILLES VCR rear sets look the dogs danglies in black aswell and the front and rear galfer discs look sik !!!.The R1 calipers look really good and cant wait to try them out up over brecon beacons here in south wales u.k...The R+G rad gaurds and oil cooler gaurds were a bit fiddly to fit but are solid and should stop the oil cooler and radiator getting holes in them and they are very good quality and should last no probs,the rear smoked brake light was a pain in the ass as most of the plastics on the rear end had to come off to fit it but it looks good and you would'nt notice its not stock apart from it being a smoked finish,the frame plugs tidy the holes up in the frame quite nicely aswell and dont look out of place against the carbon fibre frame protectors ,im well happy how it's turned out but i've just bought some gb moto indicator pods in carbon fibre but that will be it then no more carbon fibre :lol: and the smoked indicators are a nice addition on the front of the bike but im still waiting for the rear indicators to arrive from the states....So what you think not too much in your face with trick bits or nice and subtle and would'nt notice till it was parked up at a meet...??????




smoked turn signal all round and smoked rear tail light


carbon fibre frame protectors,GB racing engine covers,GILLES VCR racing rear set,frame plugs


suzuki carbon look gel seat


exhaust will look like this one but have a ceramic coating in black and the end peice will be carbon fibre...:cool:



new rear super sprox sprocket here next tuesday



these are going to the anodizers tuesday



2007 yamaha R1 4 piston silver pots on custom billett 2.5mm spacers wit h310mm galfer racing discs front and rear on black stainless steel goodridge racing brake line fron and rear

Well smart, keep it stealth-like.
 

·
Registered
Joined
·
322 Posts
Discussion Starter · #4 ·
thats the plan dave,should look nothing special on the move but when its parked up people will notice the bling on it then....not as bling bling as yours though.....:thumbup:
 

·
Registered
Joined
·
104 Posts
looks sweet . i love the front end with the smoked/ blacked out headlights .
 

·
Registered
Joined
·
2,060 Posts
DAMN! Thats alot of carbon fiber. And yes its subtle but it will definately catch your eye if youre luck enough to see it parked. Vey nice!
 

·
Registered
Joined
·
322 Posts
Discussion Starter · #10 ·
CHEERS GUYS.... the exhaust wont be done for another 7 days,its doing my head in as i have'nt been riding in 3 weeks and the weather is good for riding in anger with your mates....:shifty
 

·
Registered
Joined
·
1,007 Posts
CHEERS GUYS.... the exhaust wont be done for another 7 days,its doing my head in as i have'nt been riding in 3 weeks and the weather is good for riding in anger with your mates....:shifty

It will be sick when it gets done though so it will be worth the wait....weather is getting perfect here! Nice work on the bike man, I'm going to invest in some galfer rotors here soon when the moneys right.....
 

·
Registered
Joined
·
322 Posts
Discussion Starter · #13 · (Edited)
exhaust wont be here till the end of next week,new d.i.d. chain ans supersprox sprockets arrived a few days ago and look trick,stuff from the powder coaters and anodizer will be back next week aswell,got the new carbon fibre parts but sent them back as they were not a good fit and the suppliers said all the ones they have left in stock are the same so wont be using them so will try and source another set from another supplier...fingers crossed
 

·
Registered
Joined
·
322 Posts
Discussion Starter · #14 ·
the exhaust should be back tomorrow ready for a ride out on the weekend but it wont have the carbon fibre end peice as the guy who is building it been having trouble getting the mould machined for the carbon fibre but he said soon as its done i can send the exhaust back to him and he will supply and fit the carbon fibre to it and wont charge me for the carbon fibre which is a awsome deal,i just got to fit the new front brake pads and then im sorted for the weekend,I cant wait to get out and play on the weekend,still waiting on the chain adjusters but will have them back next week and the new chain and sprockets will be fitted monday or tuesday,i've sent the carbon fibre turn signal housings back as i was'nt happy with the fit on them so thats that on those.....lol
 
1 - 19 of 19 Posts
Top