Suzuki GSXR Forum banner

1 - 2 of 2 Posts

65 Posts
Discussion Starter #1
Dyno Jet really needs to update there install diagram. I tried to make it a liitle easier. I hope someone benefits from this. I spent three hours putting that thing on. Good note was I didnt screw anything up and everything works. Good Luck!

To sum it up get a pair of angled neetle nose pliers you will greatly benefit and save alot of time taking off the bottom injectors.

FIG D. steps 8 thru 10 are OBSOLETE...

There is no grey wire and no need to attach wire tap to pink wire from TPS SKIP THIS STEP


1 - 2 of 2 Posts