Suzuki GSXR Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,621 Posts
Take a 22mm 1/2in deepwell impact socket and a cut-off wheel and grind the socket into the shape you need.:thumbup: Kind of a pain, but it's a lot cheaper than buying the speciality tool.

I've heard of peope taking a center punch and a hammer and knocking that nut loose but I prefer the socket method.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top