Suzuki GSXR Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
i steamed cleaned my bike on monday because i had a oil leak
since then the bike has been running really bad it keeps on cutting out and
has a lack of power at one point every time i put it in 4th it dyed and then it would run better in 3rd. ive drained the carbs and before i start stripping it down dose any one have any idea what it maybe? i thought it mite be the carb sensor?
what a bloody stupid cock i am but at least the bike is clean :laughings
 

·
Registered
Joined
·
2,244 Posts
Either you forced water in through various seals, into the motor ( VERY likely, but not likely your cause) or there is an electrical connection you have SOAKED and caused it to not work right would be my guess. How hat was that steam, would it have melted anything?


PS ........ dont do that again :lol: nor pressure wash it, oil seals only work ONE way, to keep oil in, not to keep high pressure water out ;)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top