I have adjusted the chain on my bike many times and I came across a discrepancy between the procedure outlined in the service manual and the procedure outlined in the owner's manual.
The service manual indicates that: after adjusting the chain, tighten the axle nut and the torque link nut to the specified torque. Then tighten both chain adjuster lock nuts securely.
The owners manual indicates that: after adjusting the chain tighten the lock nut, tighten the axle nut.
THAT IS IT NO MENTION OF THE TORQUE LINK NUT AT ALL.
I would like to get your views regarding the above mentioned procedures. Personally I have been following the steps detailed in the service manual however the fact that the steps detailed in the owner's manual are reversed and that theres is no mention of the torque link nut is a bit of a concern.
The service manual indicates that: after adjusting the chain, tighten the axle nut and the torque link nut to the specified torque. Then tighten both chain adjuster lock nuts securely.
The owners manual indicates that: after adjusting the chain tighten the lock nut, tighten the axle nut.
THAT IS IT NO MENTION OF THE TORQUE LINK NUT AT ALL.
I would like to get your views regarding the above mentioned procedures. Personally I have been following the steps detailed in the service manual however the fact that the steps detailed in the owner's manual are reversed and that theres is no mention of the torque link nut is a bit of a concern.